HP Self Cleaning
Self Cleaning Filters - Manual & Automatic (High Pressure Range)
Self cleaning for liquid duties requiring continuous
filtration without interruption to the
flow during the cleaning process. Self
cleaning filters are available in either
manual or automatic versions with standard
design options for either low pressure
(14 BARG) or high pressure (35 BARG) system.
In operation the liquid enters the body
and flows through the element from outside to inside.
Debris
is collected on the outside of the wedge
wire element, which is cleaned without
flow interruption by rotating the cylindrical
element against twin scraper blades. The debris accumulated
during element rotation is deposited into
the bottom of the filter body from where it is periodically discharged,
manually or automatically.
Standard Features & Benefits
- Totally enclosed design - prevents liquid contamination
and increases operator safety.
- No interruption to flow during element
cleaning - suitable for critical
continuous process lines.
- Simple efficient mechanical
scraper cleaning action - reliable
easily maintained design.
- Filtration down to 50
microns.
- High quality robust 316 stainless
steel wedge wire element - long equipment
life and low running costs.
- Low liquid loss
during periodic emptying of accumulated
debris - suitable for filtration of
high value fluids and reduces waste disposal concerns.
- Suitable for most
liquids and high viscosity duties.
- Range
of automatic control equipment available
as options - no need for operator involvement.
- In
line connections - simplifies pipe
layout and installation.
High Pressure Range
- Screwed or flanged ends.
- One
piece cast construction.
- Maximum working
pressure 35 BARG at 1000C.
- Maximum working
temperatures up to 2600C depending
on seal materials.
Body materials available
- Cast Iron, SG Iron, Cast Steel, Stainless Steel or Gunmetal.
- Bottom
outlet version available if required.
|
